Smart Car Care

In the United States alone, a car is either stolen or broken into every 20 seconds. It is therefore not surprising that car alarm system manufacturers are constantly finding ways to improve the theft deterrence abilities of their products. But while its amazing how car alarm systems have evolved form their simplest beginnings, its even more amazing how car thieves still manage to get around them. Are car alarm systems really too simple to provide any protection?

Basic car alarm systems work by using simple circuitry technology if someone forces the car door open, the circuit is closed and a siren sounds off. More sophisticated car alarms have added more sensors to capture every possible threat by being more sensitive to light vibrations or pressures. Shock sensors cause the alarm to go off when someone or something hits or moves the vehicle. The alarm will go off in patterns dependent on how strong the shock is the sounds go anywhere from a short beeping sound to a very loud, nonstop alarm. Because shock sensors are very sensitive to any movement in and around the car, it often goes off accidentally; when someone leans on your car while waiting for a cab, for example, or when a huge truck passes by and causes the ground on which your car is parked to vibrate.

Whether they effectively deter thieves or not is subject to debate. Some experts say that shock sensors make car alarms go off unduly, and that this has caused people to become immune to them. Studies show that car alarm sounds have become so ordinary that almost nobody notices them anymore.

Manufacturers of car alarm systems are going full speed on their development of new and more innovative alarms that are more proactive. These alarms have the power to stop a stolen vehicle or send signals by themselves so that the owner and the police can track its location.

3 Ways To Get The Lowest Interest Rate On Your Car Loan

If you’re like the average American, chances are you buy a new car every five years or so. Most people need an auto loan when they buy a new vehicle, whether it’s a car, truck, SUV or van and since the interest on auto loans can add up over time–especially on a five or seven year loan!–it’s important to try and get the lowest rate possible on your car loan. So find a low rate car loan by

Getting your loan before you shop!

If you wait until you get to the car lot to think about financing, the dealer will try and push “dealer financing” on you. That’s because his financing usually comes with extra “padding” to make you pay more–and to boost his bottom line. The interest rate on dealer financing is often 3% higher than financing from a bank, credit union and or online loan company. So get a loan before you shop for a car. Another bonus: you’ll have more negotiating power for the price of the car since the dealer knows you’re a financially stable customer.

Knowing the current rates!

You’ll never know if you’re getting a good deal unless you know the going rates for car loans! Search the web, call around to local banks and ask friends or family what the current interest rates are for car loans. Be sure to compare apples to apples by considering things like loan term, since longer term loans often have lower rates. Your credit history will have an effect on your rate, too.

Comparison shopping!

Get quotes from as many lenders as possible. Check with your current bank, credit unions, online lending services and other loan companies. Get at least 3 or 4 different loan quotes so you can compare rates, terms and fees. Let them know you’re shopping around and that you’ve received better offers. It’s possible they’ll lower your rate or drop your fees to get your business.

You may also want to consider an online lending service that allows you to compare rates between multiple banks and loan companies at one time, since they’re a convenient way to shop around without getting multiple hits on your credit report.

A new, patented vehicle mirror that provides 260-degree peripheral vision without head movement is making driving easier, safer and less stressful for people with a variety of vision and other impairments-including its inventor.

Brad Sawyer, a 100 percent-disabled, Vietnam-era veteran, designed the mirror as a driving aid for himself. Ankylosing spondylitis (AS) has fused Sawyer’s spine, neck and rib cage, leaving him unable to turn his neck. With his safety mirror, Sawyer says he can look straight ahead and work the left and right hinges to look in either direction, clearly seeing when it is safe to turn left or right.

Easily See If Cars Are Coming

“When I’ve angled the visor correctly, I no longer have to ask other people if cars are coming,” Sawyer says.

His condition is just one of many disabilities that the MultiFlex Adjust-A-View Safety Mirror helps people overcome, Sawyer says. He describes a 33-year-old mother of two who has had her driver’s license for 16 years. She drives herself and others, including her children, safely and securely even though she lost an eye to retinoblastoma, a form of eye cancer, when she was only 18 months old.

“I no longer have to turn my head as far to check blind spots,” she says. “This tool increases peripheral vision on both sides, the left especially. Dangerous, four-corner intersections are no longer a safety concern for me.”

No More Blind Spots

Drivers affected by arthritis and those who suffer from back pain, stiff neck or impaired vision all enjoy the added safety that comes from being able to see easily what had once remained hidden in traditional blind spots, Sawyer says. The MultiFlex Adjust-A-View Safety Mirror (U.S. Patent No. 6926416) provides for tool-free attachment to the driver-side sun visor for distortion-free image reflection in left-side and right-side blind spots, as well as a vehicle’s rear seating compartment.

Measuring 123/4 inches wide by 33/4 inches high, and with left and right mirrors each measuring 51/2 inches wide by 3 inches high, the safety mirror attaches to a conventional driver-side window visor. The driver works hinges to adjust each mirror as needed and, in that way, views proximate left- and right-side traffic.

Upholstery refers to the work done so as to provide seats of your vehicle with padding, springs, webbing, fabric covers, or leather covers. It actually comes from the Middle English words of up and holden. When put together, these words mean to hold up.

When you purchased your vehicle, you surely have noticed that it already came with upholstery. There was nothing you can do with it but to drive around in it and relax. However, time really does bear its mark. Your cars upholstery would have either started to crumble or you would have had to feel each bump and pothole your car runs over for the comfort and relaxing feel of your car seats have gone and said goodbye. When this happens, it simply means that it is the right time to do some reupholstering. And automobile experts say that reupholstering your cars interior is one of the ways to make your machine look like you just bought it from the car dealer.

To have your vehicle reupholstered, start by finding the right shop to do that kind of service. You can ask your car dealer to recommend good upholstery shops. You can also ask car audio specialty shops. Or, you can ask around and ask car owners. Sometimes, the best way to find a good upholstery shop is to go to those that have been recommended by car owners.

When you have a list of upholstery shops in hand, call them and find out about what kind of upholstery they offer. That way, you can check out if they have the right kind of service that you would like your vehicle to receive. Also, ask around for prices and see if it fits your budget.

Once you have chosen your shop, visit it and see what materials they have in stock. That way, you would know your options and your choices. You would be also able to check which materials could work best for your cars interior. With one of the upholstery shops personnel, discuss your budget. Ask his or her help regarding the amount you are willing to pay and the kind of work that your car could receive in exchange. The cost of materials for upholstery could actually range from $6 a yard to a whopping $75.

These shops also have some photographs of the work they have already done. You can request the shops personnel for them. That way, you can see what kind you would like your vehicle to have. You should also ask the personnel to explain to you the process of reupholstering your car.

While at it, you can also choose to spruce up your vehicle. Carpets, grilles, and fenders are available at Auto Parts Go at low prices. They specialize in Nissan parts and they also do offer auto parts for various vehicle models and makes as well.

Ferdinand Porsche was an automobile engineer with more than a thousand patents to his name, and played an important role in the development of airplanes and the construction of tanks for the Wehrmacht as well. In the 1920s he was appointed chief engineer at Mercedes-Benz in Stuttgart and later set up his own engineering workshop. There he designed, among other things, the Volkswagen. He acted as chief of operations at the plant where the Volkswagen was made, Wolfsburg, and at the end of the war he was interned by the Allies.

He was released a few years later and immediately went to work building his first car with his son, Ferry Porsche. This car was named the Porsche 356, after Ferry, and was a sports car with styling reminiscent of the Volkswagen. In fact it had the same four-cylinder boxer engine, and wore it rear-mounted, just as the VW did. This meant that it was far from being a powerful sports car, boasting a mere 40 bhp and a maximum speed of 87 mph (140 km/h). Distinguished by its elegant and innovative body, the Porsche 356 was first produced as a convertible and then as a hard top. Father and son developed it in the workshop of Erwin Komenda, a master of restrained streamlining who had been in charge of sheet metal and design techniques for Ferdinand Porsche since the VW Beetle. This new style of closed coupe designed by Komenda soon became the embodiment of the sports car, due in part to its “fastback”.

Erwin Komenda and Ferdinand “Butzi” Porsche, the founder’s grandson, continued this tradition with the 911.

The 911 became instantly recognizable: it had an attractive sloping bonnet reminiscent of the 356, what later became characterized as “frog eye” headlights, curves running from the top edge of the windscreen to the rear bumper, and a straight waistline. From a functional and technical point of view it shared more in common with a BMW 1500, but it retained the distinctive stylistic features of the original Porsche. The new 911 became the keystone of Porsche’s identity, even though the design was not always fully appreciated. During the 1970’s and 1980’s, many Porsche designers attempted to distance Porsche from its legendary design and nearly brought the company to the edge of disaster. The more modern 924 model, “a people’s Porsche”, developed with Volkswagen, as well as the 928 fell short fulfilling expectations, and failed to allow the company to branch out in new directions and styles.

However, in the 1990’s the company seemed to realize that what some perceived as a stylistic straitjacket was in fact a market advantage. During this period Porsche embraced the timeless nature of classic styling to become highly profitable. Nearly forty people now worked in the design department solely dedicated to further improvement of the long running 911. Such developments included the 911 GTI, put forward by the in-house designer Anthony R. Hatter as a powerful combination of sports and racing car. In 1999, Porsche’s chief designer proudly unveiled the new Boxster, enabling Porsche to establish a second independent range of successful models.

7 Tips To Help You Select Your Custom Car Cover

You lovingly wash and wax your vehicle on most sunny weekends, spending time detailing every single blotch, nick, scrape, or other damaging mark on your car’s exterior. Part of the deal with owning any vehicle is making certain that it looks its best week in and week out. Still, you may not be doing all that you can to protect the finish. Other enemies including bird excrement, acid rain, and even harmful UV rays can thwart the best efforts of even the most diligent car owner. Fortunately, there is one automotive accessory that can help keep your car clean, provided you use it when your car is parked for an extended length of time. What am I talking about? Car covers! Read on for seven helpful tips to help you choose the right cover for your truck, van, SUV, or car.

When shopping for a custom car cover you must give consideration to what it does besides simply covering your car. Among some important points to know:

Will the car cover protect from damaging UV rays? If you live in an area of intense sunshine, such as Arizona, you need a car cover that offers the maximum protection from the sun.

Is the material durable? Does it breath? Will it tear if loaded down with snow or ice?

Will the car cover resist or completely repel rain?

Can the product survive weather extremes, i.e. intense heat or severe cold?

Will the car cover resist dust? Some car covers prevent even the finest dust from accumulating, dust that can mar your garaged car too.

Does the car cover come with multiple layers to protect from small insults? This is important feature to have if you leave your car in a public area. In addition, selecting a car cover that comes with side mirror pockets is a wise choice to ensure that your car receives the snuggest fit.

Finally, you will want to know if there is a lengthy guarantee offered, what colors are available, and what the return policies are, if any, of the cover that you select.

Most premium car covers allow you for them to be cleaned right in your washing machine. By selecting cold to warm water, regular bleach-free laundry detergent, and drying it on your dryer’s permanent press cycle, you can make the dirtiest car cover clean in no time. Of course, make certain that you adhere to the manufacturer’s specifications for the proper care of your car cover.